Description
Anderson Metals 5/8″ Plastic Compression Sleeve has a temperature rating of -65 to 250 degree F. It is suitable for aluminum, brass, copper, and plastic tubing. It is lead-free compliant, meeting California AB-1953 and Vermont SB-152 legislation certification. For ID copper tube size, reduce OD size by 1/8 inch. Easy to disassemble, no flaring tool required.
5/8 in.
For polyethylene tubing
Lead free compliant product which meets California AB-1953 & Vermont SB-152 legislation certification.
Suitable for aluminum, brass, copper and plas.
For gasoline, oil, vacuum lines and water.
Temperature rating of -65 to 250 degree F.
Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
To Buy Compressions Fittings with Long Nut, Please Add a “1” In Front Of The Part Number. (i.e. 68 = 168)
Easy To Disassemble, No Flaring Tool Required
Primary Uses: Water, Gasoline, Oil and Vacuum Lines
To Assemble:
1. Cut Smooth, Square End On Tubbing
2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
3. Insert Tube Into Fitting
4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
Reviews
There are no reviews yet.