Description
ET-3G is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). et-3g has a long working time: 50 min at 70°f (21°c) , and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50°f (10°c) to 110°f (43°c). Simpson strong-tie® epoxy anchors for concrete and masonry are rigorously tested to meet ibc requirements, including for both cracked and uncracked concrete applications.
Exceptional performance superior bond strengths permit ductile solutions in high seismic areas
Recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions
Design flexibility improved sustained load performance at elevated temperature
Jobsite versatility can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C)
Manufactured in the USA using global materials
22-oz. side-by-side cartridge
Tested in accordance with ICC-ES AC308 (ESR-4057), ACI 355.4 and applicable ASTM test methods
Approved for installation with multiple vacuum-drill bit systems without further hole cleaning; see Code Report (ESR-4057) for approved systems
Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions; modification or improper use of mixing nozzle may impair SET-3G adhesive performance
(1) EMN22i mixing nozzle and (1) nozzle extension are supplied with each cartridge
WARNING: This product contains chemicals like Bisphenol-A and Epichlorohydrin which are listed by the State of California as known to cause Reproductive harm.
Reviews
There are no reviews yet.